Futaba:S9251 servo

kr795.00 inkl. mva

FUTABA S9251 DIGITAL SERVO (RUDDER)

Futaba S9251is a digital high speed rudder F3C servo designed specifically for the GY601 and GY611 gyros.

Futaba S9253 features a high torque which is ideal for all control surfaces on F3C helicopters or even on precision aerobatics airplanes.

Futaba S9251 is a digital servo that features digitally enhanced microprocessors that is able to cut the response time from the transmitter input to servo reaction by half.

If you require a servo that is able to deliver:

• more accurate positioning

• quicker control response

• constant torque throughout the entire servo travel

• increased holding power when stationary

Then digital servos are your only solution!

Futaba S9251 also utilises a coreless motor and does not have magnets as standard servo motors do, so it has a smoother, more constant, and stronger action.

Despite the fact that it is a high speed servo, Futaba S9251 is not rated for use on other applications outside the use on helicopter gyro applications.

Only use a 4.8V battery source for this servo, do not use 6.0V.

Vare tilgjengelig for kjøp både i butikk og nettbutikk

På lager

Varenummer: s9251 Kategorier: , ,
Beskrivelse

FUTABA S9251 DIGITAL SERVO (RUDDER)

Futaba S9251is a digital high speed rudder F3C servo designed specifically for the GY601 and GY611 gyros.

Futaba S9253 features a high torque which is ideal for all control surfaces on F3C helicopters or even on precision aerobatics airplanes.

Futaba S9251 is a digital servo that features digitally enhanced microprocessors that is able to cut the response time from the transmitter input to servo reaction by half.

If you require a servo that is able to deliver:

• more accurate positioning

• quicker control response

• constant torque throughout the entire servo travel

• increased holding power when stationary

Then digital servos are your only solution!

Futaba S9251 also utilises a coreless motor and does not have magnets as standard servo motors do, so it has a smoother, more constant, and stronger action.

Despite the fact that it is a high speed servo, Futaba S9251 is not rated for use on other applications outside the use on helicopter gyro applications.

Only use a 4.8V battery source for this servo, do not use 6.0V.