
Tamiya: MERCEDES BENZ AROCS 4151 TIPPER TRUCK kr8,595.00 inkl. mva

Tamiya : The Vanquish (2020) kr4,395.00 inkl. mva
Tamiya : LANDFREEDER QUADTRACK TT-02FT
kr4,195.00 inkl. mva
Landfreeder Quadtrack. Kommer som byggesett.
TBLE-04S fartskontroller og 540 motor medfølger.
Må kompletteres med:
- Radio og mottaker
- Servo
- NiMH eller LiPO batteri
- Batterilader
- PS Lakk
På lager .
Varenummer: 58690 Kategorier: Byggesett, Elektrobiler, Hobby, RC biler
Beskrivelse
Må kompletteres med:
- Radio og mottaker
- Servo
- NiMH eller LiPO batteri
- Batterilader
- PS Lakk
Anbefales:
- Kulelagre: 64stk 850 (5x8x2.5), 8stk 1050 (5x10x4), 12stk 1150 (5x11x4), 8stk 1280 (8x12x3.5)
Fra produsenten:
Length: 425mm. Image shows painted and assembled kit.
On the Right Track This assembly kit creates an R/C model off-road truck which shows high performance on poor surfaces. Its chassis is based upon the TT-02 shaft-driven 4WD unit, with superlative traction from its four individual tracks that helps it plow through snow, sand, mud and other testing conditions. Its 1980s pick-up truck style body is molded in polycarbonate, with fog lamps, grille guard and roll bar recreated using separate metal-plated parts. A polycarbonate chassis cover and wheel well liners help prevent dirt and the like from getting into the chassis and potentially causing damage. |
Tracked 4WD Fun: the TT-02FT Chassis The TT-02FT chassis uses the shaft-driven TT-02 as a base, with track units in place of the four wheels. Each of the track units is attached to upper and lower suspension arms, and is powered via a drive sprocket that attached to the chassis drive shaft; they swing to allow superior contact with the running surface, and feature a sprung roller to allow easier negotiation of smaller obstacles. Plenty of ground clearance is on offer, too. Tracks are a plastic assembly type design with metal link pins, and give minimal power loss from friction for a smooth drive, even at lower speeds. Two types of link are included in the kit – standard, and jutting grouser designs – and can be used in tandem to customize your model’s grip. The chassis features a CR-Tuned motor as standard. |
Specifications ★Length: 425mm, width: 247mm, height: 199mm ★Wheelbase: 251mm ★Surface contact: 60mm/track ★Track width: 39mm ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel resin differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★CR-Tuned motor ★Electronic Speed Controller (ESC) is sold separately. |
Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger |