Tamiya: RC SUPER AVANTE WITH PANTED BODY 1/10

kr3,495.00 inkl. mva

Må kompletteres med:

  • Radio og mottaker
  • 4.8 ~ 7.4kg servo eller sterkere
  • ESC (fartskontroller)
  • NiMH eller LiPO batteri
  • Batterilader

På lager .

Varenummer: 47481 Kategorier: ,
Beskrivelse

Super Avante ferdiglakkert i metallic blå og gul. Kommer som kit.

Fra produsenten:

Special Super Avante
This assembly kit creates a special version of the stylish Super Avante 4WD R/C buggy, the (znug design) Kota Nezu-designed polycarbonate body pre-painted in metallic blue and yellow, and pre-cut for convenience. Its fenders are likewise pre-cut and pre-painted in metallic blue, just requiring application of yellow stickers, while the rear wing is also already cut. A further splash of color is provided by yellow main frame and damper spring components.

 

TD4 – Low Profile, High Performance
The TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance. The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment. Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.

 

blank blank ★Left: The slim, low profile form is striking. On this model, the main frame is molded in yellow plastic.★Right: Front CVA oil dampers feature yellow springs, visible through the windows on the cockpit sides.

 

blank blank ★Left: Rear CVA oil dampers also have yellow springs, adding a further splash of color to this buggy.★Right: The rear wing comes pre-cut for convenience. Choose between low and high stays (image shows low).

 

Specifications
★Length: 387mm, width: 246mm, height: 117mm (with low wing stays employed) ★Wheelbase: 283mm ★Tread: 214mm (front), 205mm (rear) ★Plastic bathtub frame ★Shaft-driven 4WD ★Front & rear ball differentials ★3-piece steering tie-rod ★4- wheel double wishbone suspension ★Tire width/diameter: 32/82mm (front), 41/82mm (rear) ★CVA oil dampers ★Gear ratio = 10.71:1 ★Full ball bearings ★Type 540 motor & Electronic Speed Controller (ESC) sold separately.

 

Separately Required Items
★Type 540 motor ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of February 24, 2022. Specifications are subject to change without notice.