Magic LED Eyeglasses

1. Product file

Product Name: Funky Glasses

Battery Properties: Polymer Battery

Product model: SL-004

Input voltage current: 5V 1A

Charging type: USB interface charging

Charging time: 2 hours

Length of use: m5 hours

2. Technical characteristics

The rated capacity of this product is 180mAH

APP controls the glasses pattern, you can change the text and pattern in DIY.

Ultra long life battery, up to 500 cycles or more

Adopt energy-saving, high-power, long-life LED lamp beads

Charging protection: The charging status displays a red light, and the

charging is completed automatically

3. Working principle:

LED beads are powered by the battery and can be

reused after charging

4. Use and operation:

When charging, directly link to the USB interface. At this time, the red light is

on, indicating that the glasses are in the charging state when the charging is full, the red light is automatically turned off.

Press the switch button for a long time, and press the gear position for long press is closed. Short press after booting to switch animations, a total of 31 animations.

This product needs to be used together with the APP:

The first step, long press to open the glasses, open the phone Bluetooth;

The second step is to open the APP page and click on the connected device.

In the third step, after the device shows that the connection is

successful, it can be used together.

5.

Precautions

1. After fully charged, please cut off the power in time to help protect the

battery life

2. It is forbidden to use over-powered chargers (Eg:9V/2A,12V/2a,5V/3A, etc) and maintain safe charging operation

3. Do not use the product while it is being charged to avoid burning the LED

bulb or the internal charging parts of the power supply

4. Do not expose this product to rain or moisture

5. Non-professionals should not disassemble the glasses casually to avoid the danger of charging

6. APP download

Search “Funky Glasses”

in APP store/Google Play to download

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used

in portable exposure condition without restriction.